Hardware we host.
ASIC miners for Bitcoin workloads, from the major manufacturers and any source. Air-cooled models run in our standard containers, hydro-cooled models where density calls for it.
By manufacturer
Three manufacturers make nearly every machine in the fleets we host. Each page lists the model series and how we cool them.
Air, hydro and immersion
The cooling type decides which container a machine goes into. It is the first thing we check when a model list arrives.
The standard
Fans on the machine, containers with filtered airflow sized for the draw. The rule at every Northwatt facility.
Where density calls for it
Water plates instead of fans, a cooling loop in the container. Denser, quieter, and dependent on the facility's loop capacity.
To be confirmed
Machines submerged in dielectric fluid. Whether and where we take immersion hardware is confirmed per order.
What we need from you
Four things make the first answer quick and the intake clean.
Model and variant
The exact model name, including the cooling variant and the firmware you run.
Quantity and load
Number of units and the total load in kW or MW, so capacity and container type can be matched.
Condition and origin
New, used or refurbished, and where the hardware is today. Every unit is inspected on arrival either way.
Timeline
When the machines can ship and when you want them hashing.
Hardware FAQ
Question not listed?
Send it through the form. Every message is read and answered by an operator.
Talk to SalesYes. The machines can come from the manufacturer, a distributor or the secondary market. Every unit is received and inspected before install.
No. The hardware stays yours. We provide the power and the operations.
Yes, within the same cooling type. Air-cooled and hydro-cooled machines go into different containers.
That is confirmed per order and depends on the facility. Send the model and quantity and we tell you what fits.
Firmware changes and over- or underclocking follow the procedure in your service agreement and need written approval. Warranty handling with the manufacturer stays with you too; our team provides the diagnostics and the hands on site.
Let's talk capacity.
Tell us your hardware and your timeline. We will tell you where it can run.